跟模型噴射器實在太普通
金屬噴射器本身係靚，但我覺得與模型油個TONE唔親，而且對住新安洲、京寶梵來o的機體，買金屬噴射器都窮
若有o的型仔噴射器，噴到好似車o個o的引擎金屬feel就好

1. 金屬噴射器的detail ...薄邊為例是人手不能改造, 啤件不做到.     
2. 金屬噴射器本身係可以上色. 只0係你對價格準則的問題.
3. 噴射器如果噴到好似車o個o的引擎金屬feel --> 上色成品噴射器 -->可能再貴d

e + 我睇只係價格問題....

[ 本帖最後由 有heart人 於 2009-1-15 10:24 AM 編輯 ]

1)我知金屬噴射器可以上色，但我既然唔想要個種金屬質感，o甘做乜買貴既金屬噴射器來噴
2)我係想自己噴色，唔係已噴完成品
3)金屬色顏料sm系列都唔平

"我知金屬噴射器可以上色，但我既然唔想要個種金屬質感，o甘做乜買貴既金屬噴射器來噴"
因為金屬噴射器的detail ...薄邊, 層次感為例是現時塑賿啤件沒有做到. 市面其實都有塑賿啤件噴射器改件. 不過跟跟模型本身噴射器差不多. 所以無又平又detail的噴射器改件解決你的需要....

"金屬色顏料sm系列都唔平"
你既然唔想要個種金屬質感就無需要用sm系列顏料上色. sm系列顏料本身就係要盡量做出金屬質感嗎...
其次在金屬質感上上色係可以方便你用一般油去做到其他效果.

可以用metal primer做底,再用透明色改色

噴電鍍油ok嗎??
舊post:http://www.hkml.net/Discuz/viewt ... ighlight=%B9q%C1%E1

你究竟明唔明我想點阿!?
我想成件模型都係噴油作品，令到個tone一致
我只想搵o的shape靚既噴射器自己噴
你答我有無就得啦
做乜要同我argue

成本問題，最後先考慮這方法

oh...你唔明多D...我答左la. SORRY I stop here.

人地都係提供意見，再講，你係發問者，係咪應該用好d既態度，即使答案令你唔多滿意，洗唔洗用咁既語氣對人，對方係咪得罪左你 ?
長輩經常同我講既一句說話   "你想人地對你好，首先你要對人好"   係有其道理，對方唔係爭你錢，亦唔係你既仇人，只不過路過見你有問題，想幫下你，你唔領情唔緊要，都唔好用d咁既態度對人，平心而論，你咁樣講野，好難令人繼續幫你。

去拆左架真車來用~

要有金屬feel又唔要有金屬質感
你知唔知自己講緊咩?不如你自己組織下先啦

唔知係你表達能力低定我接收能力差,
完全唔知你想要咩,又話要已噴到好似車d引擎金屬咁,
又話要自己噴,到底要咩呀?
不如你搵張圖先啦.

I understand what did he say...

If he buys the metal parts, the overall color tone on the metal parts will not be same as the plastic parts, it is his main concern (however, i am not sure that it is true or not, if the metal parts after spraying will also give the same tone for the overall models, then in my point of view, i really think that it is problem of 'value of money'...because we may think that why should we use so much money to buy a metal part kits)

So he wants to ask whether in this market will the producer can have plastic parts which are as sharp as metal parts...

And Mr. heartman has given the answer that the plastic producers cannot do that because of technical problem rather than 'loss of profit'......

YES
you totally know what I need

SORRy
語氣真係重o左o的