2年幾冇砌車, 想開始返就由430開始~
第一次玩pe...整得麻麻...
去圖engine + cockpit

之前見d師兄噴紅色會打粉紅色底...
所以又試下
上少少sponsor水貼就噴clear coat lu

上咗光油未
點解噴完可以咁令嘅

Nice paint works! The Fujimi F430 features a problem on the stance, the rear suspension is about 1mm lower than it should be after assembling, I saw you already done some adjustment right? But it seems a bit too high on your model, or is just a testfit? What kind of carbon fibre decail did you apply on the air intake manifold? Looks like Tamiya stuff, the texture of which is terribly over sized to me. I suggest toning down with some coats of smoke paint, just my humble opinion~ Good luck!

mugennsx2000
未上光油..只係上左主色
都唔算係好令, 我諗近d快d咁噴就會令

auw12
that is not really fitting on my car, i just put the body on it to take picture only
but refer to what u say i still need to adjust the rear height
and about the air intake decal is from very old aoshima junk decal
that is my first time to lay a decal on air intake, and.... i dont actuclly have recenlty carbon decal produce
so i just apply the very old decal on it to see am i have enough skill to apply decal on a curively surface anyway hehe
thx for your opinion~~