無聊吹下水 - 噴筆 - 模型友聊天室

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#1

只看樓主

發表於 2007-10-24 01:48 PM 資料主頁短消息加為好友

無聊吹下水 - 噴筆

之前賣落支新既gunze 0.3 噴筆
但一直唔知點解都唔捨得用....
漫漫發覺, 原來係因為本身個支0.2用個時唔太識保養
個出氣button成日都好似klick 住klick住咁
係唔太識保養既情況下,真係唔太想開支新筆害埋佢....
直到現在，支筆好似買來有d多餘.....

大家會唔會有類似既情況？
例如買左d野返來遲遲都唔用？

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

NS000

壹等兵

UID 17245
精華 0
積分 2
帖子 157
成品數目 2 件
閱讀權限 10
註冊 2007-6-12
狀態離線

#2

發表於 2007-10-24 01:56 PM 資料短消息加為好友

i have 3 airbrush andi use them all the time... i mean I am just lazy to switch components so why not buy another brush~

個出氣button成日都好似klick 住klick住咁 <------ total disassemble it, some paint could be jammed the shaft

[ 本帖最後由 NS000 於 2007-10-23 09:57 PM 編輯 ]

matleung

中將

o吾識

UID 1091
精華 9
積分 25
帖子 16627
成品數目 25 件
閱讀權限 10
註冊 2004-12-19
來自 o吾知
狀態離線

#3

發表於 2007-10-24 01:56 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 01:48 PM 發表

之前賣落支新既gunze 0.3 噴筆
但一直唔知點解都唔捨得用....
漫漫發覺, 原來係因為本身個支0.2用個時唔太識保養
個出氣button成日都好似klick 住klick住咁
係唔太識保養既情況下,真係唔太想開支新筆害埋佢 ...

「吾捨得用」呢一方面我可以代勞...

支0.2有冇拎支針出黎大洗過??　

LHPP . VCR .兔

carman

上校

模型製作新手

UID 19102
精華 3
積分 66
帖子 5960
成品數目 66 件
閱讀權限 10
註冊 2007-7-26
來自愛生事家庭
狀態離線

#4

發表於 2007-10-24 02:01 PM 資料主頁短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 01:48 PM 發表

之前賣落支新既gunze 0.3 噴筆
但一直唔知點解都唔捨得用....
漫漫發覺, 原來係因為本身個支0.2用個時唔太識保養
個出氣button成日都好似klick 住klick住咁
係唔太識保養既情況下,真係唔太想開支新筆害埋佢 ...

買左d野返來遲遲都唔用？<====我剛剛轉噴筆都係咁....

之前用開入氣噴槍...用完一定要收返晒...好煩...
一路都意為用泵果 D一開一收會重煩,但e+轉左用泵噴就唔同之前諗既渡同晒~
saie好個位就唔洗成日又開又收~

歡迎交流 : http://hk.myblog.yahoo.com/carma454

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#5

只看樓主

發表於 2007-10-24 02:06 PM 資料主頁短消息加為好友

其實最近個幾月噴野,差唔多每次我都會大洗支筆(with 天拿水)
但個button始終「甘」左落去就唔識即刻彈返上來
依家支筆同single action冇分別.........

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

carman

上校

模型製作新手

UID 19102
精華 3
積分 66
帖子 5960
成品數目 66 件
閱讀權限 10
註冊 2007-7-26
來自愛生事家庭
狀態離線

#6

發表於 2007-10-24 02:12 PM 資料主頁短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 02:06 PM 發表

其實最近個幾月噴野,差唔多每次我都會大洗支筆(with 天拿水)
但個button始終「甘」左落去就唔識即刻彈返上來
依家支筆同single action冇分別.........

會唔會d "lo c"上得太緊

歡迎交流 : http://hk.myblog.yahoo.com/carma454

SOZAI (蘇仔)

上校

砌模型係用口唔係用手!!

UID 11993
精華 0
積分 10
帖子 4246
成品數目 10 件
閱讀權限 10
註冊 2006-7-2
來自零米鎮
狀態離線

#7

發表於 2007-10-24 02:17 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 02:06 PM 發表

其實最近個幾月噴野,差唔多每次我都會大洗支筆(with 天拿水)
但個button始終「甘」左落去就唔識即刻彈返上來
依家支筆同single action冇分別.........

應係ｄ油積左在膠圈位．．．．　你試下放ｄ　ｔｈｉｎｎｅｒ入個杯．．．拉支針出黎．．再推返入去．．．
應該會有ｄ油滲出黎掛．．

咪硬膠啦..大C!...

機動老鬼

少佐

UID 2020
精華 1
積分 12
帖子 6645
成品數目 12 件
閱讀權限 10
註冊 2004-7-20
狀態離線

#8

發表於 2007-10-24 02:19 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 02:06 PM 發表

其實最近個幾月噴野,差唔多每次我都會大洗支筆(with 天拿水)
但個button始終「甘」左落去就唔識即刻彈返上來
依家支筆同single action冇分別.........

條彈弓老化/滲咗D油落彈弓洗唔清.....

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#9

只看樓主

發表於 2007-10-24 02:34 PM 資料主頁短消息加為好友

QUOTE:

原帖由 機動老鬼 於 2007-10-24 02:19 PM 發表

條彈弓老化/滲咗D油落彈弓洗唔清.....

then what can i do?
and how can i prevent this from happening?

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#10

只看樓主

發表於 2007-10-24 02:35 PM 資料主頁短消息加為好友

QUOTE:

原帖由 SOZAI 於 2007-10-24 02:17 PM 發表

應係ｄ油積左在膠圈位．．．．　你試下放ｄ　ｔｈｉｎｎｅｒ入個杯．．．拉支針出黎．．再推返入去．．．
應該會有ｄ油滲出黎掛．．

tried many times, sometimes work for awhile and then resume the problem again....

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#11

只看樓主

發表於 2007-10-24 02:35 PM 資料主頁短消息加為好友

QUOTE:

原帖由 carman 於 2007-10-24 02:12 PM 發表

會唔會d "lo c"上得太緊

no screws around wor...

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

明天

中佐

UID 9476
精華 2
積分 26
帖子 9685
成品數目 26 件
閱讀權限 10
註冊 2006-3-27
狀態離線

#12

發表於 2007-10-24 03:02 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 02:06 PM 發表

其實最近個幾月噴野,差唔多每次我都會大洗支筆(with 天拿水)
但個button始終「甘」左落去就唔識即刻彈返上來
依家支筆同single action冇分別.........

你更係滲左d天拿水去個嘩佬果度,....令到入面個O-ring冇晒潤滑油或者變左質,(所以會啜住個掣彈唔番上黎),有機會救到,哄要加番d潤滑油去個嘩佬入面....按幾下會有改善
同埋,如果你想拆針黎谷筆,支筆咀要向下,唔好太大氣壓,唔好比d天拿水谷左去後面....漏左入嘩佬入而
搞唔到就拎黎我幫你整都得,我有兩支筆都係咁醫番

[ 本帖最後由明天於 2007-10-24 03:03 PM 編輯 ]

我的人像相薄
我個blog

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#13

只看樓主

發表於 2007-10-24 05:14 PM 資料主頁短消息加為好友

QUOTE:

原帖由明天於 2007-10-24 03:02 PM 發表

你更係滲左d天拿水去個嘩佬果度,....令到入面個O-ring冇晒潤滑油或者變左質,(所以會啜住個掣彈唔番上黎),有機會救到,哄要加番d潤滑油去個嘩佬入面....按幾下會有改善
同埋,如果你想拆針黎谷筆,支筆咀要向下 ...

i am suspecting similar reason.... and you give me a veyr good suggestion this way~
so, will wd40 works for it?

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

明天

中佐

UID 9476
精華 2
積分 26
帖子 9685
成品數目 26 件
閱讀權限 10
註冊 2006-3-27
狀態離線

#14

發表於 2007-10-24 05:22 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 05:14 PM 發表

i am suspecting similar reason.... and you give me a veyr good suggestion this way~
so, will wd40 works for it?

no......用silicon油,...氣槍用果 D.....WD40一樣會侵蝕橡膠o-ring

我的人像相薄
我個blog

明天

中佐

UID 9476
精華 2
積分 26
帖子 9685
成品數目 26 件
閱讀權限 10
註冊 2006-3-27
狀態離線

#15

發表於 2007-10-24 05:36 PM 資料短消息加為好友

最好折左支針,按掣,同埋塊頂片出黎先.....然後對準個嘩佬位加油.....如用針壺會更好

附件: 您所在的用戶組無法下載或查看附件

我的人像相薄
我個blog

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#16

只看樓主

發表於 2007-10-24 05:39 PM 資料主頁短消息加為好友

QUOTE:

原帖由明天於 2007-10-24 05:22 PM 發表

no......用silicon油,...氣槍用果 D.....WD40一樣會侵蝕橡膠o-ring

what is this?
where to buy?
how much?

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

明天

中佐

UID 9476
精華 2
積分 26
帖子 9685
成品數目 26 件
閱讀權限 10
註冊 2006-3-27
狀態離線

#17

發表於 2007-10-24 05:50 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 05:39 PM 發表

what is this?
where to buy?
how much?

圖中3支是旦一支都得.....廣華街d槍舖一定有得賣...幾十蚊,我個壺果 D就用rc車既避震油加添加劑溝成

附件: 您所在的用戶組無法下載或查看附件

我的人像相薄
我個blog

joey

少將

UID 779
精華 8
積分 100
帖子 14004
成品數目 100 件
閱讀權限 10
註冊 2004-10-5
狀態離線

#18

只看樓主

發表於 2007-10-24 05:59 PM 資料主頁短消息加為好友

QUOTE:

原帖由明天於 2007-10-24 05:50 PM 發表

圖中3支是旦一支都得.....廣華街d槍舖一定有得賣...幾十蚊,我個壺果 D就用rc車既避震油加添加劑溝成

thanks so much~~
let see if that helps~~
i always think, if i can ge rid of the existing problem on my 0.2, i will then start the 0.3 with no pressure~~~
haha~~~

btw, i think i really need a stand for my air-brush, cox when i put down the brush from time to time, since the angle is too flat, i think the paint may fall to the back side of the brush which in turn, flow into the backend and stuck the sir flow....
as i examine the brush stands on the market, the angle is way more sharp then my existing setting, which compose of 2 big 衫夾 clippig on the drawer....

JOEYKO.com
To be a good winner sometimes you have to be a good loser too. It doesn't mean you have to be very happy about it to be second or to lose but to give the enjoyment and pleasure for the driver who has won.

明天

中佐

UID 9476
精華 2
積分 26
帖子 9685
成品數目 26 件
閱讀權限 10
註冊 2006-3-27
狀態離線

#19

發表於 2007-10-24 06:15 PM 資料短消息加為好友

QUOTE:

原帖由 joey 於 2007-10-24 05:59 PM 發表

thanks so much~~
let see if that helps~~
i always think, if i can ge rid of the existing problem on my 0.2, i will then start the 0.3 with no pressure~~~
haha~~~

btw, i think i really n ...

原來你噴車都係用0.2mm咋......我就用0.5.....我而家覺得0.5最好用,又用得最多...噴灰噴光油底油都係用佢....(已有兩支)
噴筆座買番個啦,幾方便,反正你買模型都用左唔少錢

我的人像相薄
我個blog

Academy	Bandai	Dragon	Fujimi	Hasegawa	Italeri
Kotobukiya	Revell	Tamiya	Trumpeter	Volks	Wave