突然好想砌車，所以即刻報個名砌落場車。
砌得唔好，影又影得唔好，希望大家比d意見喇!(我仲報多架名呀)

Good to see someone did this project.

Not bad if this is your first made but of course still room to improve for the clear coating, keep it up.

Which clear coat you have used? The chrome decal (Mobil 1) on the bonnet seems problem, what do you think?

btw, what is your next project then?

[ 本帖最後由 Mikusen 於 2007-7-16 02:49 PM 編輯 ]

砌得唔錯,下次可以花點心機在打磨上,加油

Thanks , Mikusen buddy,I just use hobby Super clear,the decal (Mobil 1)is thicker than others , also it got a texture on it ,quite hard to make a smooth surface,are you taking about this on the bonnet ?

by the way, my next project is :
PENNZOIL NISMO GT-R (R34)

[ 本帖最後由 clarklo 於 2007-7-17 11:53 AM 編輯 ]

Yes, it is. Surely it is a matter of the nature of the decal itself.
I have checked in 1999.co.jp but could not find the construction sheet for Mobil SC about how to applying decals on the body.

Previously, Tamiya had made attention how to apply chrome decals for NSX Raybrig 2005.
http://www.1999.co.jp/image/10047254z5/70/5

Some modelers who made NSX Raybrig and suggested to use water based clear coat on chrome decals.

Mikusen 兄，可否指出我的步驟有有否做錯?我看到你的車滑得可怕呀....

基本打磨(600-800)->1000 surfacer->打磨(1200沙紙)->主色(上2層)->水貼->光油(薄1 層)->厚噴super clear(2層)->打磨(2000沙紙)->細目-->仕上目

有冇邊個area要再加程序?

My opinion as follows:

Firstly,
between this 2 steps(...主色(上2層)->水貼...), did you found the surface whether it is smooth or not?

If not, back to your step 1 (#1200 surfacer, I normally use Tamiya surfacer light gery) and make sure you got a smooth surface before applying body colour.

Secondly, how long you have let the super clear to dry before start sanding by #2000 sandpaper.

3rd, if using 細目 first, you may find it difficult to make the surface shiny. Suggest you start either

route 1: 粗目 -> 細目 -> 仕上
route 2: Modelers #2000 -> 仕上 (normally I will use Finisher's Micro compound)

but again, it is not dealing with chrome decal.

[ 本帖最後由 Mikusen 於 2007-7-17 04:31 PM 編輯 ]

唔好意思~可以插咀嗎??

如果一開始就用咁粗砂紙來磨,個底已經某程度粗左....所以點都好,磨上2000先再噴任何野, 上完SURFACER都要咁做,再要求高D再係色油上再磨......
一層一層由底做起,咁個面先會水平如鏡(雖然我都係得個講字)

基本打磨(1500-2000)->1000 surfacer->打磨(2000沙紙)->主色(上2層)->水貼->光油(薄X層)->厚噴super clear(X層)->打磨(1500-2000沙紙)->Modeler Compound 2000

銀色個MOBIL字好靚，银得嚟好形！

[quote]原帖由 clarklo 於 2007-7-16 12:21 PM 發表
突然好想砌車，所以即刻報個名砌落場車。
砌得唔好，影又影得唔好，希望大家比d意見喇!(我仲報多架名呀)




     Hi,    clarklo

     Your Mobil 1SC seems pretty good, but the paint seems uneven, can you feel that !

水貼上得好靚

我又插咀...
基本打磨(1500-2000)->1000 surfacer->打磨(2000沙紙)->主色(上2層)->稀主色(上2層)->打磨(2000沙紙)->水貼->稀光油(薄2層)->厚噴光油(2層)->稀光油(薄2層)->打磨(1500-2000沙紙)->粗目->仕上
等乾既時間未計算在內