[img][/img]

[img][/img]

[img][/img]

[img][/img]

[img][/img]

難度你係木頭兄???

You're right...

你隻兵仔無上油.但又同樹一齊出post.呢件野當你咩好?

我仲以為係一架porsche

Just for scale, you may ignore it as the title is "一 Paul 樹".  Will paint it, to be more accurate, a whole troop.

Good point!

可否 Post 製作過程d 相~

好樹一 "paul"！  

兄台，不如分享下 "paul" 樹的製作過程，等大家學下野.....

Major tools used
[img][/img]
Wire preparation (making all the wires straight would facilitate the subsequent steps)
Length: 2 to 3 times of the proposed tree height
Amount of wires: 10 to 12 條
Size: 0.5mm to 1mm dia. (this sample tree using 11條 1mm wires.  I think mixing some 0.5mm wires would be better)
[img][/img]
扭彎 the wires at the middle with a "hole" (the wire of the hole will be the tree roots)
[img][/img]
繼續扭 until it looks like a tree
[img][/img]

[img][/img]
And then 包膠紙
[img][/img]

[img][/img]

[img][/img]

[ 本帖最後由 ericni 於 2009-10-12 11:10 PM 編輯 ]

樹枝上高果 D 咁似藥材鋪 D藥
棉茵塵??  

Will try 棉茵塵 next time... Thanks for your innovative idea.

棵樹d 樹紋整 ga~

As to 學野, I should study your 飛行器... Mr.達文西... How's the progress?

一 Paul 樹"

開石膏漿 (can add some 白膠漿 in it) - I've bought 3-gun(s) 石膏粉, only 1/5 was used.

Highlight: using old 牙刷 to make the 紋理 while the 石膏漿 is hardening (couldn't take any picture while processing 石膏漿)

[img][/img]

Let it completely dried, and then start to paint with 廣告彩 + snow-effect
[img][/img]

Better to use 2 pliers to do the wiring work
[img][/img]

[ 本帖最後由 ericni 於 2009-10-13 01:17 AM 編輯 ]

好大工程咁wo

Not quite...  It takes about 2 weeks spare-time to complete, but I had been spending some time on selecting materials (i.e. leaves & snow effect) and planning for work sequence because it's my first time to do something from scratch.  It's good experience for me to do other models in future, I would think.

我都以为是，进来才发现是神树啊

請問樓主 D LEAVES 係用咩整架
好似真樹  好靚啊!!

Thanks.  It's 文竹 (real plant).