等左5個幾月, 終於到手.
唔洗再做 research, 已經有幾百 mb 相.
開始假組, 估唔到可以當 injection kit 咁砌, 勁 fit

風翼跌左落地, d decal 連 clear coat 爆左, 要訂過張 decal 先有得攪

三幾十, 唔慳得.

I saw something like that b4 @ Make-up for just about 500yen

Moving ?

By the way, I found 1/43 is really hard to me since I could not hold the part very secure ar, Always have some accident because of the size of the part  

I had the old version released at yr 2000. It was about 18,900 YEN. Now, it is 30,000. Most of the people may think this is too expensive while making comparsion with the old one. However, this is a total new kit and its fitting, detail and decal could be the best of MFH ever produced. So, you may take a comparion with the old 98T (actually, the old 98T is almost same as the old version of 97T)



In year 2009, I believe MFH has paid for the licence fee including GOOD YEAR.


For the PE parts from the old 97T, they are very simple.


However, the PE parts for the new version of 97T, it is totally different from the old one. For the total area of PE, it is about 4 times as that of the old one.



For the new 97T version, it is coming with a big size of CF template decal which is not available before.


Metal Tuned Part. Yeah ! There is a Metal Tuned Monocoque included in the old version of 97T. However, it has no detail at all.



Nowaday, MFH has growth up and got more experience in design. They understand that some Metal Tuned parts are just good for showing off CMC technology but not very useful instead. So, they have made a new one in resin and with detail added. It will be very useful for other amended detail.




For the body, the old one was made in White Metal

For the new one, it is done in resin and it is as thin as the white metal one



For the underchasis, it was done in brass sheet with simple shape


For the newly designed underchasis, it is made with PE and some part parts


For the metal tuned part, there were only very few available inside the 97T box


For the new 97T, MFH has changed some old white metal parts into metal tuned such as damper.


For the other white metal parts, the old one was quite simple.


For the new version, it includes many other white metal parts. So, you can imagine the detail level of the new one


In addition, the metal parts are having more detail than before, you can take a closer look on the old and new brake disk. There is no detail on the old one at all.


There is a rain tyre too


new 97T manual
http://www.1999.co.jp/10083418

old 98T manual
http://www.1999.co.jp/10012421

I got the old version before and I have sold it when I knew the new version is coming. I sold it about 250 US. Fortunely, 好彩賣得快 since the new version is totally different from the old version

This is a supper detail one and I have never seen a 1/20 g kit having such good fitting a detailing. If you buy one, I give you some material for FREE

老闆話當年剛剛買左部 5 Axis CNC, 想 Demo 下, 所以連 Moncoque 都車出來.
宜家[大個仔喇], 唔會為[車]野而[車]野.

By the way, 有冇葡萄牙站個 Diffuser 睇下 ? 睇下佢用邊款. 應該唔洗 Cut (Step 21)

以前個 body 都係 White Metal 嫁, 後尾我話比佢知 d 鬼仔 攪唔掂, 佢先出 resin body.

Actually, using White Metal is not only about cost but also related to the production time and other factors

其實 Engine Block 用 White Metal 質感好似好d. 另外, 有d要 Adjust 的 parts, White Metal 會好d

但是有d 真是 White Metal 死硬派, 聽到 Resin body 即刻放低

[ 本帖最後由 DM 於 2009-3-9 04:06 PM 編輯 ]

其實 CMC 果 D真是底買, 不過我喜歡自己砌同 research

where did you saw the price ?

人老手腳慢, update 下先

有d野有 Resin 會好d, 不過 Body 用 White Metal 做 fitting 會易d

等減價

十一月

Resin body 冇咁易 Adjust, White Metal 易扭d

繼續龜速前進

補 Gap



Monocoque

Just a couple layers of Ricebox Rose Gold on top of Gunze surfacer

好小 Progress.

上左 Clear Coat, 用沙紙省過, 冇用 Compound, 因為唔想太令


較 Alignment, d suspension Arm 有d要改小小


大部份 Body 執完, Next Week 應該可以上色

你邊度鄉下嫁 ? 烏魯木齊 ?