It was a busy year 2010 for me since I've worked my socks off for university applications = = and nothing done at all after my Banshee head project(glad that was completed) recently things started to settle down a bit and finally being able to get on something. This is my first Ma.K. , and i must say the kit is simple and delicate, people who felt bored with gunpla may try to think about purchasing one of these . The post is here to remind myself, not much done for now, but will update it asap

also i would like to seek for help for memebers in Hkml, since i dont do well in chinese typing, therefor i always uses a writting pad to help me out, but recently HKML doesent support writting pads? where the forumn doesent give any response to what i wrote on the writting pad. I've tested the writting pad and it acts normal on microsoft word and all other programs like msn etc, but just doesent works for internet= = anyone can help me out ?

[ 本帖最後由 T.M.R 於 2010-7-11 08:46 PM 編輯 ]

努力  

支持Ma.K.！

可以用圖像軟件直接在相片上加字，例如下圖：

這圖是用「Snagit Editer」加字。

另外，有D輸入法幾易用，例如九方，可以試試。

你可以試試先在word文件打中文字，然後copy，再在討論區paste。

密切留意，Ma.K 要支持 ! ~

唔該師兄先，只怪自己蠢，之前想唔到
先搞搞啲管先，入面係銅支，外包彈弓。最煩係要屈銅支 ，搞咗好耐先搞到ok gum......

效果都ok gea

另加咗小小補品 =今日進度


同時希望有大大可以分享一啲設定圖，不勝感激 　　　　　　　　　　　　つつく。。。

Ma.K 一定要支持!!

very nice ...

上完身體主色, 尚欠小量上色, 水貼同 washing.小弟第一次上類似迷彩既東西, 請各師兄指點錯處, 方便日後改善.  題外話, 太空機應用咩色做washing?
太空機重做迷彩?!?



oh 重有, 最近想買部相機(新手) 聽人講G11都幾好, 大大們點睇?

太空機應用咩色做washing

>> 我用 法郎油 enamel  啞黑 + 德國灰      ( 底色係 油性 )

迷彩係到而家我都未點又唔敢點o既技術, 你隻迷彩, 我覺得soft邊有散點咁, 我見人地soft得o黎係帶實, 唔知點講.

如果我早o的睇你個post, 你就唔洗屈條銅枝屈到屎啦, 你用銲錫線呀嘛, 五金舖有售, 買一卷用一世, 又平, 你話幾好啦! 最好係易屈到你想要o既曲線呀嘛, 而且就算屈得唔滿意, 好易又屈過, 或者手腳轉動o個陣, 又唔會好似銅枝禁硬, 影響o左手腳轉動.

其實玩ma.k 自由度好高~~~太空機做迷彩完全唔覺得係問題 現在噴得幾好
樓主現在的迷彩反差低~~色調亦比較暗~~如果樓主想做的wash 係類似做filter效果的話...會進一步tone down 個色~ 要小心呀

anyway: 做 filter 前最好上光油 ~

再支持 !! ~

多謝師兄們支持


▲▲27▽▽兄意思係先啞黑再用灰洗? 定係少量黑溝灰再洗?


受教了….  之前用尖嘴鉗屈銅線屈到手痛…..  搞咗成個鐘先屈到想要既型 不過亞力兄用銲錫線唔會太軟咩?  印象中好似好軟
的確噴完出嚟同所想有差距但又唔知點搞好 唯有下次再接再厲吧......


隻實物色無咁暗只怪小弟用手機影相 (大誤!!) 順便想問下clau 兄如果filter 底油應該用光澤定消光?

銲錫線係軟, 但係你屈o左個形出o黎之後, 唔搞佢, 佢唔會軟到走樣, 但係因為佢軟, 先可以跟隨著手腳o既轉動, 因為仲有條彈弓包著, 所以始終唔會軟得好離普.

確噴完出嚟同所想有差距離 <-- 唉!  矛計o架啦, 唔通你又走去成隻洗過咩.

我隻野wash 係兩溝,   enamel 啞黑 + 德國灰 +  多 d  thinner   

某d 位 只係  啞黑  + thinner

[ 本帖最後由 ▲▲27▽▽ 於 2010-6-8 10:11 PM 編輯 ]

this was actually completed about a week ago, but due to studying abroad in a hurry, I'm finally free today to post. And maybe i needa quit modeling for quite a long period of time (but i'll still hang around here in HKML)  the work is in HK for now so i'm sorry i dont have more photos of it. After a washing with enamel black, I did as  ▲▲27▽▽ suggests and have another wash of grey on top. This is my first actual weathering model work also the first Ma.K/SF3D model i had. Its a new kit from wave and as i said before its user friendly. So enjoy   
Front

Side

Back

Top


i did not manage to have the time to complete the pilot(sad) hope i'll get it done for the complete post in future

嘩!  怪獸出現呀!

幾好呀!  舊化o左之後, 迷彩o既感覺強o左!  Good!

成品區見

is it ok if i post same pictures maybe i'll post in future