抽油箱卒之整好喇，可以復工了。

[ 本帖最後由 馬飛 於 2015-5-21 01:35 AM 編輯 ]

嘩，專業制作……應該可以大貨生產了

似乎仲未"開光"用過?  用瓦坑紙介成filter, 會唔會太密唔多透氣?

唔錯喎, 用過後介紹下效率

不過咁大個箱似乎有d難搵位放

好掂渦！
我用抽油煙機的隔油棉仲簡單過瓦通紙。

just to show off here is my  
房外完全無味



[ 本帖最後由 @屙爛屎@ 於 2013-5-30 03:19 PM 編輯 ]

業餘嘅手工呢姐
出街賣緊都好專業，可量産，呢部只叫手作仔。

[attach]417619[/attach]

[attach]417620[/attach]

[ 本帖最後由 馬飛 於 2013-5-30 10:07 PM 編輯 ]

係，重係"柱"(成部放咗係台度)。

cut 完瓦通紙通下佢，中央部份無紙碎塞就OK，瓦通果part吾係好厚 20mm.

個箱係幾佔地方，放塊板係上面變多張枱用先

隔油棉/瓦通紙 (可共用或單獨使用)

[attach]417621[/attach]

你部都有整調速播。

yes cannot use full speed when paint because cannot paint if in full speed,
only use full speed when every thing is complete

That's why DIY can fulfill the demand.

[ 本帖最後由 馬飛 於 2013-5-31 12:56 PM 編輯 ]

DIY is best

請問點樣調速？即係開一個風扇同開嗮三個的分別？

工業用調速風扇同調速制。

[attach]417720[/attach]

just normal PC computer fan control
you can buy them at wan chai computer center for 250$

but my is 350. can accept higher output
have total 6 fan control output just enough to connect
all the part i use is brought from wan chai computer center no need special part
a normal PC power supply 250W will do the job you can choose any fan that size at least 12CM
no need to use same crazy set up as i do, i just do it for fun more that for practical use
for my set up i use a 850w Gold. power supply and 6 huge delta Fan that for over clock use ^_^

i have total 6 fan for my design
2 fan in one unit  and i got 3 so total is 6 must have fan control


[ 本帖最後由 @屙爛屎@ 於 2013-6-2 09:24 AM 編輯 ]