真係用方形細到鼻屎咁細，電線都好幼，好彩學生攪！

I never seen this kit before.  Are there a lot of light bulbs in this kit?  How many wires are inside?  And is there any other kit, perferably MG or even PG that has this kind of light bulb set up?

終於有高手整到啦好正呀~

禁請問知唔知邊度有得買丫？我都要買得幾多下架！唔該

哈哈, 後庭失守．．．．．．．．．．．．．．．

so it is going to be mass production?

如果隻野系黑色 用紅光  真系超絕~~~~~~~~~

唔知有冇估錯喇, 如冇意外你所形容既應該係SMD Led, 大陸叫貼片 led, 有好多個型號同顏色 連粉紅色,紫色都有 問您死未
普遍既型號有#1210 ;around 3.5 x 2.5 mm 零售價below RMB$ 1.00 / 粒 (其實我覺得自己買貴左)
香港就唔知邊到有得賣喇, 我自己都係上開深圳 去華強路d電子零件市場買

希望幫到師兄您

有禁多色添丫！ 好多謝你比左禁多資料我丫！我又唔稱得上師兄！我只係個16歲既Len仔！所以唔係好方便番到大陸！係度呼籲大家！如果各位人兄知道邊度有喱D SMD LED賣既話！麻煩你通知聲我丫！唔應晒

the kit doesn't come with LED light bulbs, this is a modified version, maybe will be mass produced as a modificatoin kit, which is why uses a/c adapter instead of battery for longer lasting continious liught up and will probably come with a platform with the adapter plud embedded and the modified kit's feet's sole as the female plug for charging or power up. mainly for display...

question to ultrayeung & kenzo1112 : although good idea to have a charger/ display platform... but from my pass experience with mainland's LED is their burnout time and dimming of about 70% in a month's time, but getting US or Europe SMD LED will be expensive, not only that the heat if not dissipated correctly will also shorten the LED's life (using any heat transfer tape to stick those LED inside the gunpla?), also do you need any driver or controller (embed in the platform?) for this set of LED??!! thanks

is there a work in progress photos?  How do you fit the light bulb in the joint?  And does the joint c/w transparent?  What does the original kit look like?

玩燈效果確係正 !! ~ NICE WORK ~  

Hi Seinyat
的確大陸的 led 質量很參次, 但至於它的壽命能維持多久 & 在某情況下會否影響其壽命. 這個我不能很確實回答你
因為我的作品通常是接a/c 電源, 跟display 櫃的電源接在一起, 加上我不是經常開燈, 即使開燈,時間亦不會很長, 最多都只是2-3小時.
(p.s. 我好幾年前有裝led的作品至今都可以運作)

至於led 產生的熱量問題, 以我經驗,smd led 工作時所產生的熱量不是很高, 主要產生熱量的部份在電線與led 的接點, 可以用熱縮管把接合部份包裹住就ok

另組裝接合方面, 跟普通led一樣, 只是用電線連接正負極及電源, 沒有加任何controller (有時懶 連開關制都唔裝...), 最後用噴膠or bul-tack 等固定係所需位置即可

Wa! Very detail! Thanks a lot! I only paint the model, all the connection of the Led are from my student.
I've no time to connect the LED- around 40pcs.

好正,,,中左毒,,
樓主既燈好平均!

Thanks!
名師出高徒!!

trams-arm

高手係我學生，我只係上色！

可唔可以問下你學生D  SMD LED係邊度買架？同幾銀？唔該！

我學生係澳門人，佢話係大陸買LED，鴨尞街好似無！HK$2粒左右，但一次要買好多，佢買咗HK$700