Originally posted by 龍千影 at 2006-9-30 09:43 PM:


又打磨機．．．．

粗沙紙？我有呀

Originally posted by 喜平二景虎 at 2006-9-30 09:50 PM:

你沒磨機,但我手上仲有一招.都係最后先教你,呢招有小小危險同難做.

睇下d高手有沒辨法先啦

Originally posted by 喜平二景虎 at 2006-9-30 09:52 PM:

0表面有少少x突感.表現出受炮之後金屬走位.唔知點講.想像下啦

Originally posted by SOZAI at 2006-9-30 09:56 PM:
好似我的咁/.......

Originally posted by chestert at 2006-9-30 09:57 PM:
留意下撞咗嘅車,比如Bumper,同車門,凹面係平滑而不規則的。

Originally posted by 喜平二景虎 at 2006-9-30 09:59 PM:
你太多彈孔啦.  彈孔做幾粒係個盾到就ok
刀傷係個胸同盾到已ok
呢d放個好位就ok

刀傷用刻多可能ok
彈孔用釘or lo-si 加熱就ok  但危險同要識控制.唔係我買定花生等睇戲都ok

Originally posted by sapphireblue at 2006-9-30 10:00 PM:
不如用手鑽輕輕鑽個凹坑, 唔知可唔可行~~~

p.s. 只係一個白痴意見, 可以不理......

Originally posted by 喜平二景虎 at 2006-9-30 10:04 PM:

都話你似12少,但12少支j 值1500大元有溫度控制.你支有沒.
你緊玩j 成支j都唔用得第2次用上唔到錫

Originally posted by chestert at 2006-9-30 10:12 PM:
另外一種彈孔製法 by 岩田先生。應用喺厚裝甲上。

[ Last edited by chestert on 2006-9-30 at 10:16 PM ]

Originally posted by wah167 at 2006-9-30 10:15 PM:

條條大路通羅馬,
只要做得靚, 話之佢係用薯條補丫!
同埋邊個界定乜野係正當?
千影先生請繼續努力!

Originally posted by wah167 at 2006-9-30 10:18 PM:
tamiya 好多年前出過一個專係整彈痕既機器...
原理係用一個"球"不停鑽磨舊膠....

註:  呢個係我好多年前係co-co 睇返黎既記憶, 請不要插我

Originally posted by stitch at 2006-9-30 10:19 PM:
add oil !!! totally support u !!!

Originally posted by chestert at 2006-9-30 10:21 PM:


係香囉拜神果啲,蚊香都得

Originally posted by chestert at 2006-9-30 10:29 PM:
點着支香,唔好有火!放支香埋去,唔洗大力插落去,膠面受熱會變型,慢慢加大你想要嘅形狀。

Originally posted by raymondshe at 2006-9-30 10:31 PM:

我講就係呢個方法
不過都係要打磨機．．．

Originally posted by wah167 at 2006-9-30 10:32 PM:

小心香會留低碳灰....

Originally posted by sapphireblue at 2006-9-30 10:31 PM:


不要鑽穿窿呀......只係輕輕鑽凹佢, 跟住用釘刮花個凹位.....

Originally posted by chestert at 2006-9-30 10:32 PM:


小心啲火,唔好近住啲易燃物品,例如Thinner

Originally posted by raymondshe at 2006-9-30 10:34 PM:

用ｄ廢位試左先
好易整衰ｇａ