因為ｄ油已經係濃得濟喇．．．．

But for 1/43, never use 2 Bars ar

都係同面積有關姐

其實真係要自己摸下，呢樣野幾睇個人手勢同習慣(幾遠噴、噴幾快)，仲要match埋你慣用開幾大枝筆同壓
我慣用1:4，只係咁Q畀我搵到個平衡點 arm我噴法 (其實可能不太正確都未定)

我暫時只到叫做個面滑、唔粗、無咩橙皮，當然未做到 DM 兄咁滑同亮啦

btw thx 幾位師兄既解答，我開光油(GX100)既比例係1:3，洗唔洗去到1:2/1:2.5 ?

我果 D係後期加工

For GX100, 1:3 seems to be the best ga la

oh thx !~
後期加工 ?? 可否講d hits黎等小弟學下野

Polishing

u mean 上完底油後用少量磨光膏打磨 ?

After surfacer has been applied, I use to polish the kit with using 1200 to 2000 paper and try to make the surface as smooth as possible. For application of color paint, I try to thin it a little bit more. However, it will take some more time since more layers have to be applied in order to achieve a solid color. Finally clear coat. For something like GP2, although the manual suggesting the portion of thinner is same as the portion of hardener, I use to add a little bit more in order for easy application and more smooth surface. However, it will take a little bit long to DRY. But it is acceptable. For something like GX100, 1:3 seems to be the best whih I have done some experiment before. Finally, polishing work is a MUST. That's it

P.S. I will try to avoid using compound after having surfacer on since some paint may be really sensitive to compound / oil. If you have not clean the kit very well, then it may cause unncessary trouble.

[ 本帖最後由 DM 於 2009-5-22 05:06 PM 編輯 ]

SKY兄, 真人演繹係唔係正好多呢

哦…明解…原來個張圖已經去左咁多個 step…仲以為齋上完底油