请问喷GP2系米用0.5mm嘅喷笔最好？ - 模型人技術交流區

xiaochuanh

壹等兵

UID 20300
精華 3
積分 9
帖子 125
成品數目 9 件
閱讀權限 10
註冊 2007-8-23
狀態離線

#1

只看樓主

發表於 2007-11-12 12:10 PM 資料短消息加為好友

请问喷GP2系米用0.5mm嘅喷笔最好？

问两个问题
1.请问喷GP2系米用0.5mm嘅喷笔最好？因为手头只有0.3mm的喷笔，系米用0.5mm喷笔会效果好啲？0.3mm全开，可吾可以勉强用住先？

2.另外请问喷GP2系米吾使等前一层干左先喷下一层，系米没喷一层，隔3－5分钟就可以喷第二层咖啦？
第一次用GP2，已经搜索过以前啲贴睇过啦，就系有呢两个疑问，请各位大大帮忙解答一下，谢谢！

DM

中校

UID 9725
精華 8
積分 19
帖子 3258
成品數目 19 件
閱讀權限 10
註冊 2006-4-5
狀態離線

#2

發表於 2007-11-12 04:11 PM 資料短消息加為好友

QUOTE:

原帖由 xiaochuanh 於 2007-11-12 12:10 PM 發表

问两个问题
1.请问喷GP2系米用0.5mm嘅喷笔最好？因为手头只有0.3mm的喷笔，系米用0.5mm喷笔会 ...

Actually,0.3mm Nozzle is OK. Mine is just a 0.35mm
According to Finishers, the mixture should be around 2 Main Liquid + 1 Hardener + 1.5 Thinner. However, if the Nozzle is getting smaller, more Thinner is required. When you apply the GP2, if you find there are some little crystal or roughly surface, it means some more thinner is required. However, more Thinner in your glossy, more SHRINK and this process may take a little longer. You may want to do some experiment on junk kit first.

For all kinds of the glossy coat, first couple layers must be MIST/THIN. It helps to avoid accident because of thinner in the glossy coat. For GP2, after you have applied a thin coat, it would be getting dried in about 3 to 5 min. After serveral layers, you may apply more (thicker) coat on your kit

[ 本帖最後由 DM 於 2007-11-12 04:13 PM 編輯 ]

xiaochuanh

壹等兵

UID 20300
精華 3
積分 9
帖子 125
成品數目 9 件
閱讀權限 10
註冊 2007-8-23
狀態離線

#3

只看樓主

發表於 2007-11-12 04:57 PM 資料短消息加為好友

QUOTE:

原帖由 DM 於 2007-11-12 04:11 PM 發表

Actually,0.3mm Nozzle is OK. Mine is just a 0.35mm
According to Finishers, the mixture should be around 2 Main Liquid + 1 Hardener + 1.5 Thinner. However, if the Nozzle is getting smaller, m ...

thanks,your answer is very helpful !I would do it according to your advise

DM

中校

UID 9725
精華 8
積分 19
帖子 3258
成品數目 19 件
閱讀權限 10
註冊 2006-4-5
狀態離線

#4

發表於 2007-11-12 07:07 PM 資料短消息加為好友

QUOTE:

原帖由 xiaochuanh 於 2007-11-12 04:57 PM 發表

thanks,your answer is very helpful !I would do it according to your advise

You 're welcome and pls sharing more experience and nice model to us

24billy

壹等兵

UID 35088
精華 0
積分 1
帖子 114
成品數目 1 件
閱讀權限 10
註冊 2008-11-25
狀態離線

#5

發表於 2010-1-6 06:35 PM 資料短消息加為好友

QUOTE:

原帖由 DM 於 2007-11-12 05:23 PM 發表

Actually,0.3mm Nozzle is OK. Mine is just a 0.35mm
According to Finishers, the mixture should be around 2 Main Liquid + 1 Hardener + 1.5 Thinner. However, if the Nozzle is getting smaller, m ...

唔好意思...我想請問如果喺噴第一或第二三層薄噴嘅時候...有塵黏左喺面...咁點算好...因為聽聞唔可以番噴...可以點樣攪? 唔該..