大家好^^

孫權係我第一隻3國的SD....
希望唔好爛尾la...

大家認為應唔應該改手腳關節? 因為我怕我技術不足.....

well looking good... but still long way to go I guess right?

係....重有長路"伴"佢走呀XD

改完手腳關節就可以打磨

打磨地獄.....林起都怕怕- -

if u look into 曹操ガンダム  then I guess u know nothing is easy...

改到用曬D aa膠....買完又完- -

改手個設計強度不足...影影下解體= =, 所以有左第2個設計

本來想save D 功夫,用改件改.....但T生到又賣曬Orz
改到想死= =
只係改左右手右腳....天呀

ps: 附上photoimpact整的一張合成相(睇洛左邊都整完= =)

重有小小相.............

what happen to your putty???

why so many putty?

有咩問題呀請問?

多畢地...係因為我未打磨...
我依只係用6個工具做野: 鑽, aa膠,畢地, 膠板, 舊件, cutter

未開始用錯,sand paper
改曬就會慢慢打磨= = (先甜後苦..)

okay... I see what u meaning...

but first there are feel things bear in mnid if u want to do some conversion...

1. Cement is more important then AA Gule...
-  the reason is AA Gule can give u fast dry and able to hold the model together... but if u keep moving the parts awhile... then u will find the AA Gule isn't last long... but if u using Cements then the model will last much longer and stronger...
THE REASON of this is AA Gule is just like holding 2 parts with a extra hand... if the hand become tried then no longer hold the parts and it will falling apart... however Cements is a totally difference from how AA Gule work, Cements will melt those 2 parts and make it become 1 piece... that is why ppl always tell u to wait for the cement dry for at least 1-2 days... cux if the area isn't completely dry then it will break again easy...

2. Putty is able to fil up the gap but on the other hand is also work like Cement... so that is why I don't think is a good idea to add too much putty on the model, this will make the plastic become really soft and unable to hold the parts if u don't wait it completely dry first...

these r the 2 reason cux me asking u such question b4...

先謝謝你耐心的回覆. 我睇得出你好想教小弟先打咁大段野出黎

我都係依到作出小小交流, 不過可能係錯的技巧

你話Cement is more important then AA Gule... 無錯, 模型膠水的強度係比起aa膠強得多.AA Gule act as  an extra hand, 但只要個兩件你想痴的件接觸面係大的, aa膠的強度就有所提升.接觸面的大細取決於兩件件的pei口齊唔齊同平唔平.

所以我用左畢地, 畢地可以增加兩件件的接觸面, 使到aa膠強度有保證. 而且畢地加aa膠的一個好處就係比較容易控制, 做bb, 件又細, 所以模型膠水好容易係塗的時候流去D detail位, 燒毀D detail. 畢地加aa膠就唔會....你塗膠水都係要等一兩日, 點解唔用畢地加aa膠.

畢地重可以塗多D, 再加aa膠係佢上面, 等佢dry左就可以磨, 當ab畢地咁用.

就係因為我要等所有畢地dry左先可以打磨, 所以我張改造, 打磨分得咁清....


因為畢地同模型膠水都有同一樣成分吧.....所以我用畢地, 都係個句, 容易控制...


我又係到亂up野- -
附上右手臂打磨左小小的相,

[ 本帖最後由 chapmanlau1992 於 2008-7-29 04:40 PM 編輯 ]

first of all... for your picture u upload... that is a simple way to fix it...
drill a hole and use paper clip to enforce it...

here is an example...



and Putty won't do the same work as cement does...

P.S. if u can please get this book "NOMO KEN　野本憲一"


[ 本帖最後由 LifeAfterDeath 於 2008-7-29 07:54 PM 編輯 ]

上身基本打磨完成la ^^
只欠裙甲同小腿未磨
之後會上灰check bug , 應該都好多下- -"

想問問大家孫權肩裝甲點做無縫? 因為如果做左無縫就無左輕裝= =
請教教我

都冇人show我 = =

唯有自己林- -

我將肩甲加闊, 咁就可以將肩裝甲套入去...可以幫肩裝甲做無縫之餘又可以使孫權多點霸氣!

check曬bug, 只係未上1000灰同上色

支持你啦

sorry for the late reply... I was busy like hell in past few days...
for the shoulder part there is a easy way.. cut it up and u can get it done...

too bad I don't have a photo here... but I will try to dig it up for u...

你指的係8字cut?我都有林過咁做
不過如果咁做的孫權就會同原設的一樣....咁薯XD

但我依家咁做就可以幫孫權增加霸氣, 又可以更加接近說明書上的"蒼白壁"動作

依個idea我林左好耐- -唔好ban我la, 好hurt架= ="

LifeAfterDeath兄:我有幾個問題想問你

我係用手塗的, 請問問點樣可以做到好似你部舊化曹操咁?
可以教我嗎?

well I am using the paint called GW/AV paints

and make sure u cut this away...

點解- - 我唔想做八字cut就係因為想保留個3粒的...可以玩變裝ma- -

關於舊化可唔可以講詳細D, 例如點樣可以做到個D污積

在下都想知!