素組左 , 相 .. 無謂放  ,

ref web 有一個 : http://modelrunner.net/chiba/oku10f/0.html

想問 , 佢兩盾想整大塊d應該點搞 ? 我知會用到膠板 , 但無從入手....

點做好 : (

[ 本帖最後由 Scropio 於 2008-6-25 09:58 PM 編輯 ]

個網04年架喎
你真係問得有效率

人哋都話咗借網頁你參考，唔識睇重要打人！！

好簡單, 膠片+畢地+打磨...

and your point is??

post the 素組 first~

回復 #8 royal281 的帖子
係係 , 素組相到 , 都唔算素組 , 一剪件就改左幾樣野 , 已經成為左我既例作工事...



仲有仿hg00既股關節 , 但影漏了


回復 #6 哈帝斯 的帖子
唔通要十字斬開塊件駁膠板... 好似好危險咁wo ...
一失手就死硬...

回復 #5 tim71 的帖子
我唔介意既...

不論改造型or改關節,我勸你改裝唔好亂用牙膏畢地,  結構鬆脆又無承托力之餘, 仲會" 拿"爛 周邊既膠料 (佢天拿水成份較多), 買返支手鑽or小電鑽, 圓膠條同膠板混合使用. 睇你張圖, d 較位位已經被畢地破壞得幾嚴重....用牙膏畢地做補強, d關節唔會襟玩的

if l am yrs...我唔會斬開原件, 我會用膠板由頭塔過。
2個choice..
1) 先在膠板上畫好盾大細--> 再用畢地加厚-->修外型
2) 先在膠板上畫好盾大細-->用積層法加厚-->修外型

希望你明啦...

回復 #11 哈帝斯 的帖子明 , 但..我未必做到 ....
你覺得用畢地造易d定 , "積層法"(<---用膠板積厚?)
回復 #10 iceman1983 的帖子
真係你唔講我唔知 , 多謝提醒 !
但係...d較位係我自己剪得衰 xD
但 , 我會注意你講個樣野架喇 , THX

"積層法" is simple...

here is sample of my work...

here is the step by step:








this is the idea... hope u understand how is work...

Oh ! It's  great !!!!
It's the light on my head , i think i can get it

thx a lot

cool... if u get the idea... now u can think about build a gundam out of plastic card...

should buy many for it

我覺得"積層法"易d, 不過用畢地就快d

諗兩諗 ... 我做唔掂 ... 一改 , 我就會keep唔到原版個盾既形狀......
所以  , 我決定大改!!!!!!




我這個冗員正design中

剛修理好部電腦 ....

未整盾 , 但變左咁樣 ,

裙係用左以前g-unit既件 , 會唔會唔match？　

刀 , 第二個頭 , 尖炮都改左 , 腰及手臂關節.....看來以成為我改呢三隻野既指定動作了

go for it... as long as u like it... nothing is match or not... just remember when u like it and is your design... this is called UNIQUE...

don't worry others and have fun... good to see u back (donno your computer was crashed)