試砌素組一次

骨架

全身

炮,盾,彈匣



頭

再拆散

打磨前後,未補筆地



希望各位大大多多指點

It seems to me that when you cut the parts out from the frame, you cut it too deep........what kind of tool did you use?  Is not a really a big problem, but using proper tool can save you a lot of time on unnecessary procedures later on.....

agree!! cut twice to safe time on sanding + putty filling + sanding again....very tedious

同個d素組的大大相比
你好像比他們更亂來呢
連cut 件都搞唔掂

[ 本帖最後由 冥界之王 於 2008-1-11 02:06 PM 編輯 ]

國產貨... 你玩佢定佢玩你呀....

呢隻應該唔係國產貨
睇d紋路同detail咁sharp就知
係佢啪得差

我諗樓主係為方便上色先特登唔啪實姐....

i think so too, but apart from not "snapping" it too tight, can also "widen the holes or cut short the sprue so that it wont "snap tight" for easy dismantling, but no need all, only those part that you need to separate the painting process, for internal frame, most wont be expose so might as well make them as tight as possible, sometimes a bit of cementing will make it stronger... from my experience anyway

期待大作 la .......

謝謝seinyat 的意見
因方便上色，所以唔啪實
另外近來功課比較忙，所以打算四五個月後先再開工

有好多地方cut件好粗暴~攪到d件一顏一忽~

我只用普通的剪鉗
大家會唔會用星星的剪鉗？係咪會剪出黎靚D？

其實MG說明書有教點cut件~架, 你留意睇下,佢唔係一次過cut水口係分兩次架~

如果樓主唔講左佢用鉗
我以為佢用手''meet''件

有時貪快愛都會"meet"  ga

Patience is the key to building gundam kit...............
People will not judge you on your speed, but on the overall finish of the product........